6KW IP 44 ENDUSTRIYEL YÜKSEK TAVAN & SANAYI TIPI  INFRARED ISITICI Menşei İSVEÇ

 

400V3N~* 8,7 
Max. Element Sıcaklığı [°C] 700 
Boyutlar LxHxW [mm] 1875x83x358 13.2 Kg
Protection class: IP44.
CE compliant.

 

Industrial infrared heater IR For premises with large volumes and high ceilings Reflectors of shiny anodised aluminium for optimal heat distribution. The mounting brackets allow the heater to be angled in five different positions. Connection plinth which allows for connection of a regulator or for serial connection of several heaters. Protection grille is available as an accessory. Casing of grey alu-zinc coated steel panels, very resistant against corrosion. IR is suitabe for total or supplementary heating of premises with large volume and high ceilings. It can also be used outdoors for example on sportarena stands or to keep loading bays dry and frostless. IR has a robust industrial design.

 

Br.

6000 Watt IP 44 ENDUSTRIYEL YUKSEK TAVAN SANAYI TIPI INFRARED ISITICI - ISVEÇ

  • Montaj

    6KW IP 44 ENDUSTRIYEL YÜKSEK TAVAN & SANAYI TIPI INFRARED ISITICI400V3N~* 8,7

    Max. Element Sıcaklığı [°C] 700

    Boyutlar LxHxW [mm] 1875x83x358 13.2 Kg

    Protection class: IP44.

    CE compliant.

     

    IR is suitabe for total or supplementary heating of premises with large volume and high ceilings. It can also be used outdoors for example on sport arena stands or to keep loading bays dry and frostless.


    Industrial infrared heater IR is installed horizontally with mounting brackets that can be installed directly against the ceiling or wall. The mounting allows the radiation angle to be adjusted 30° in each direction. The heaters can also be suspended from wire (minimum Ø 3
    mm). Protection grille is available as an accessory.

  • Teknik Özellikler :

    Function
    The infrared heater heats up rapidly and provides additonal heating input immediately to the area.

     

    Positioning
    For point-heating, at least two infra-red heaters are placed to ensure that heat is provided both in front of and behind people involved. The heaters must be mounted at
    least 2 m above people ́s heads.

     

    Mounting
    Suspension brackets can be fitted directly to the ceiling or wall. The mountings allow the radiation to be varied 30° in any direction.
    Note the permitted installation arrangements and minimum distances shown In all installations the elements must be horizontal. It is also possible to suspend the heaters from cords(minimum Ø 3 mm).

    Electrical installation The apparatus must be permanently connected. The installation must be carried out by a qualified technician, and the
    appropriate regulations must be followed. A heat resistant connection cable that can withstand a constant temperature of at least 90 °C, must be used when connecting the heater.  The connection box contains terminal blocks for connecting cables with areas up to
    16 mm2. This makes it possible to connect several heaters in parallel.

     

    Maintenance
    When an infrared installation has not been in use for some time, the elements should be ”dried”. Switch on the heaters for 5-10 minutes and then allow them to cool. The equipment will then be ready for use again. If the reflectors are dirty, they can be blast-cleaned using  compressed air or wiped clean with a soft cloth.

     

    Safety
     For all installations of electrically heatedproducts should a residual current circuit breaker 300 mA for fire protection be used.

     

    The unit may have hot surfaces during operation and when cooling down!


    The unit must not be fully or partially covered with clothing, or similar materials, as overheating can result in a fire risk! (E)

     

    The unit must not be placed directly under fixed wall sockets!